eps block moulding machine

eps sandwich panel production line eps sandwich panel production line Technical Parameter Item Unit\Model PSB-Q200 PSB-Q300 PSB-Q600 PSB-Q800 Net Internal Size Of Mould Chamber Mm 2040x1020x530 3060x1250x630 6120x1230x630 8120x1240x630 Volume of Mould Chamber m³ 1.10 2.41 4.74 6.34 Product Density/Specific Weight Kg/ m³ 4.5-30 4.5-30 4.5-30 4.5-30 Production Efficiency( Standard Condition) Piece/h 4-8 4-9 4-9 6-9 Steam Pressure Mpa ...

Full Automatic Vacuum EPS Panel Machine eps block moulding machine Technical Parameter Item Unit PSB-QZ600 PSB-QZ800 Net Internal Size Of Mould Chamber mm 6120x1250x1030(630) 8160x1250x1030 (630) Volume of Mould Chamber m³ 7.79 10.37 Product Density/Specific Weight Kg/ m³ 4.5-40 4.5-40 Production Efficiency( Standard Condition) Piece/n 7-11 7-11 Steam Pressure Mpa 0.6-0.8 0.6-0.8 Compressed Air Inlet Diameter Mm 65 65 Steam Inlet Diameter Mm 150 ...

Automatic Continuous EPS Cutting Line Automatic Continuous EPS Cutting Line Introduction: 1) With automatic wire setting system to set cutting wire automatically for different cutting sizes. Efficiency improved & Energy saving . 2) By vibration cutting for horizontal and vertical cutting, the whole work efficiency increase twice over compared with the traditional cutting. 3) With correct device& block holding device for each station(vertical, horizontal and cross cutting) improve the cutting high precision. 4) With PLC and light sensor control, fully-automatic; 5) Working procedure: This is a fully-automatic and continuous cutting line which can process 5 blocks together at the same time. 6) It uses PLC control, and the blocks will be stopped and transferred automatically by reaching the light sensor. 7) The block will be cut horizontally in the first station, then transferred to the next station for vertical cutting, then transferred t...

Numerical Control CNC Foam Cutting Machine Numerical Control CNC Foam Cutting Machine Numerical Control CNC Foam Cutting Machine Numerical Control CNC Foam Cutting Machine PRODUCT INTRODUCTION The main frame of the machine is made of aluminum alloy profile connected by special joints with stable function and performance, reasonable structure, high precision, easy and convenient operation which can save time, strength and raw material, It can cut many kinds of tow-dimensional and rotational parts, which is mainly used to cut rotational molds with more curves such as European components, T slot board, column, pellet, etc.. With full automatic industrial control system, the machine adopts top class motion control board at home with quick response, strong anti-interference ability, high control precision, stable control and operation, favorable self-diagnosis and self –adaptive ability, etc. which can work all day for long term. It can draw all kind...